HEIDENHAIN ND 1400 - Manual (Page 119)

105
10
Setup
Entering the supervisor password
The supervisor password must be entered into the
Supervisor setup screen to access most setup fields.
To enter the supervisor password:
1 Access the setup menu as described on the pre-
vious page.
2 Touch the Supervi-
sor menu item, enter the
supervisor password us-
ing the number keys on
the front panel and press the Enter key.
3 Setup editing privileges can be retained
until the QC-330 power is cycled, elim- i -
nating the need to reenter the password if
another setup editing session is required.
Touch the Keep Privileges choice field to toggle the Keep Privileges parameter from No to Yes.
4 Views of the Setup can be locked so that the supervisor password is required to see the setup parameter
settings. Touch the Lock Setup choice field to toggle the Lock Setup parameter from No to Yes, then
delete the password from the Password field and press the Finish key.
5 Operator access to program functions
can be limited to running existing programs
by toggling the Lock Programs choice field
to Yes. Touch the Lock Programs choice
field to toggle the setup parameter from No to Yes.
The Setup Menu