HEIDENHAIN ND 1400 - Manual (Page 124)

110 QC-300 Series User’s Guide
Supervisor screen
The Supervisor screen contains fields for entering
the supervisor password, choosing to keep privileges
until the power is cycled and locking the setup menu
so that setup parameters cannot be viewed. Button
controls are also provided for saving system settings
to, or loading setting from the USB port.
Entering the supervisor password
The supervisor password must be entered into the
Supervisor setup screen to access most setup fields.
To enter the supervisor password, touch the Supervisor menu item, enter the supervisor password using the
number keys on the front panel and press the Enter key. Asterisks will be shown in the Password field.
Keeping setup privileges until the power is cycled
Setup editing privileges can be retained until the
QC-330 power is cycled, eliminating the need to
reenter the password if another setup editing ses-
sion is required. To retain setup privileges, touch
the Keep Privileges to toggle the Keep Privileges
parameter from No to Yes.
Hiding setup parameters from unauthorized personnel
Views of the setup can be locked so that the supervisor password is required to see the setup parameter set-
tings. Touch the Lock Setup choice field to toggle the Lock Setup parameter from No to Yes, then delete
the password from
the Password field
and press the Fin-
ish key.
Limiting access to program functions
Operator access to program functions can be
limited to running existing programs by tog-
gling the Lock Programs choice field to Yes.
Touch the Lock Programs choice field to toggle
the setup parameter from No to Yes.