HEIDENHAIN ND 1400 - Manual (Page 114)

100 QC-300 Series User’s Guide
Printing a report
Feature measurement data or records of QC-330 system settings can be printed at the USB port.
Printing feature measurement data
Feature measurement data can be printed in the following formats:
• None No data will be printed
• Select User will be prompted to select the data that will be printed
• Report A standard report of all feature data or a tolerance report of only features that have
tolerances applied will be printed
To print feature measurement data:
1 Touch the question mark Icon and display the setup menu, then display the Print setup screen.
2 Verify that the desired data is specified in the
Print Button choice field. None, Select or Report can
be specified. In this example, the
Report is specified.
3 Verify that the Serial Device is specified in the Des-
tination field. In this example, the file will be printed to
a USB printer, so the USB Printer
is specified.
4 Verify that the desired report is specified in the Re-
port Type setup choice field. Standard or Tolerance can
be specified. In this example, a Standard report is specified.
5 Specify other settings that are consistent with the computer application’s
requirements.
6 Press the Finish key to exit the setup mode, and then press the Print key to send the data to the
printer.
NOTE
Refer to the description of the Print setup screen in Chapter 10: Setup for more details
regarding the Print screen.