Grass Valley K2 Summit Client Service Manual May.14 2010 - Manual (Page 97)

09 April 2010 K2 Summit Production Client Service Manual 97
Codec option card removal
Codec option card removal
To remove either the MPEG-2 encoder card or the AVC-Intra codec card from the
codec module, first remove the codec module, then proceed as illustrated.
After installing the replacement card, install the current version of K2 software. An
over-install is all that is required. You do not need to first un-install the software. This
ensures that the card is flashed with the proper version to be compatible with K2
software.
Remove two M3 phillips head sc
on the faulty card 2
Orient the codec module
with the cards facing up and
identify the faulty card 1
If this channel has the problem,
replace this
card
Disengage
connector on
the faulty card 3
If this channel
has the problem, replace this card
Note: AVC-Intra codec cards
are shown. Procedures apply
similarly to MPEG-2 encode
cards.