Grass Valley K2 Summit Client Service Manual May.14 2010 - Manual (Page 60)

60 K2 Summit Production Client Service Manual 09 April 2010
Chapter 3 Service Procedures
the Control Team” . If network configuration is complete, enable the write filter.
Create the Control Team
NOTE: Team control ports only. Do not team media ports.
1. If you have not already done so, disable the write filter.
2. In Device Manager, right-click the adapter name that on this K2 Summit Client is
assigned to location PCI bus 4, device 0, function 1.
3. Select Properties
The Properties dialog box opens.
4. Select the Teaming tab.
5. Select Team this adapter with other adapters , then click New Team . The New Team
Wizard opens.
6. Enter Control Team.
Click Next .