Grass Valley K2 Summit Client Service Manual May.14 2010 - Manual (Page 75)

09 April 2010 K2 Summit Production Client Service Manual 75
Running diagnostics for K2 Summit Production Client
b. Enter the following and press Enter .
chkdsk /F
The screen displays a message similar to the following:
The type of the file system is FAT32.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
c. Press the Y key and then press Enter .
5. Restart the K2 Summit Production Client.
Running diagnostics for K2 Summit Production Client
If you suspect a problem with K2 Summit Production Client hardware, you can run
diagnostics and check for errors.
1. Make sure all media access is stopped on the K2 Summit Production Client. Also
make sure that there is nothing preventing a restart, as it is required after you run
diagnostics.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Diagnostics .
The Summit Diagnostics application opens.
3. Click Start .
The Overall Result indicator displays RUN while diagnostics are underway.