Grass Valley K2 Summit Client Service Manual May.14 2010 - Manual (Page 61)

09 April 2010 K2 Summit Production Client Service Manual 61
Create the Control Team
7. Select the check box for the adapter name that maps to Control Connection #1 (PCI
bus 4, device 0, function 1) and for the adapter name that maps to Control
Connection #2 (PCI bus 3, device 0, function 1). Click
Next .
8. Select Switch Fault Tolerance . Click Next .
9. Click Finish and wait a few seconds for the adapters to be teamed.
10.Open the Modify Team dialog box as follows:
a. In Device Manager | Network Adapters, right-click Control Team and select
Properties . The Properties dialog box opens.