Grass Valley 8995DNC v.1.3.0 User Manual
Page 40
40
8995UPC/DNC/UDX — Instruction Manual
Configuration
The header information on each web page includes the following:
•
Model
and
Description
are read-only generated by the module.
•
Frame Location
is defined on the 8900 Series GeckoFlex Frame Configura-
tion web page.
•
Slot
number reports the module’s location in the frame.
•
Input Video Standard
reports the input video type and rate selected on the
System Config web page.
•
Input Video
reports the status of the video input to the module.
•
Output Timing Source
reports the output timing source (Local, Ref 1, Ref 2
or Input) chosen on the System Config web page.
•
Output Video Standard
reports the current output video format selected.
•
Fiber Module Type
reports the type of SFP fiber module installed or
Not
Installed.
Web pages with configuration parameters each have a
Defaults
button at the
bottom of the page to allow resetting of default parameters for only that
page.
Web Page Links
The web interface GUI provides the following links and web pages for the
8995 modules (
):
•
Status – reports input video and reference signal status, presence of
Fiber Optic and Genlock option submodules, and module hardware
and software version information (
),
•
I/O Config – shows a graphic representation of inputs and outputs to
the module and allows naming of each input and enabling and dis-
abling of signal reporting (
),
•
System Config – set the I/O standard for the input and output of the
module, the output timing source, colorbars test output, and Reference
Restore parameters (
•
Functional View – provides a graphical block diagram of the video and
embedded audio configuration pages for the module with links to each
web page (
),
•
Video Input – allows selection of the video input source (Coax or fiber)
and provides the status of all sources, including fiber optic submodule
option inputs (
•
Frame Sync – provides horizontal and vertical timing and loss of signal
controls for the 8995 module, multi-frame delay selection, minimum
delay mode, manual freeze mode, and timing status tables (
),
•
Color Correction – provides RGB gain, offset and gamma correction
adjustments (