Grass Valley 8995DNC v.1.3.0 - Manual (Page 23)

8995UPC/DNC/UDX — Instruction Manual 23
Set Fan Speed to Maximum
Set Fan Speed to Maximum
Set the front cover fans to maximum speed to maximize the cooling in the
frame.
To increase fan cover speed:
1. Remove the front cover of the frame.
2. Remove the 8900NET module (next to the power supplies).
3. Locate Configuration DIP switch S1 ( Figure 8 ).
4. Set position 7 to the right as shown in Figure 8 .
5. Return the 8900NET module to the frame and replace the front cover.
Figure 8. Set 8900NET S1 for Maximum Front Cover Fan Speed
S1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Configuration DIP switch S1
075080000_02
r0
12345678 12345678
S2 S1
Fan Speed
at maxium
8900NET
Remote
Override
LED