H3C Technologies H3C Intelligent Management Center - Manual (Page 292)

282
Traffic trend – peak rate
NTA displays the Max./Min. Peak Rate chart to the right of the Traffic Trend chart when the Peak Traffic
Analysis feature is enabled and the time range for the report exceeds 6 hours.
The Traffic Trend – Peak Rate line chart displays the minimum and maximum peak traffic rate for the
associated task for the selected time range for both inbound and outbound traffic. This chart contains
four lines: Max. In Peak Rate, Min. In Peak Rate, Max. Out Peak Rate, and Min. Out Peak Rate.
Figure 185 Traffic Report: Traffic Trend – Peak Rate Report
If the selected traffic analysis task enabled the Baseline Analysis feature, the Traffic Trend combination
line chart shows two charts: inbound Traffic Trend and outbound Traffic Trend. NTA displays the
Max./Min. In Peak Rate chart and Max./Min. Out Peak Rate chart under the Traffic Trend chart. For
more information on configuring the Baseline Analysis feature for the VPN traffic analysis task, see
" Adding a VPN traffic analysis task ."