H3C Technologies H3C Intelligent Management Center - Manual (Page 197)

187
The TopN Applications Communicating with the Source Host displays the TopN applications, the volume
of traffic attributed to the associated application for the selected source host, and the percentage of the
associated application traffic observed for this source host.
Figure 116 Source Report: Traffic Details
Destination reports
The TopN Traffic Report for Destination Host chart provides the distribution of traffic for the TopN
destination hosts for the selected traffic analysis task. This report also contains a link to traffic reports for
the selected destination host.
The TopN Traffic List for Destination Host provides a list of the TopN destination hosts measured by
volume of traffic for the selected task. This report contains a link to reports for the selected destination host.
The host query icon
next to the Destination IP address is a link for initiating a host query and a link
to the results of the query. NTA also provides a query option for filtering reports based on criteria you
define.
To view the reports for a probe task, click the Destination tab to view traffic reports for the selected probe
traffic analysis task.
Query destinations
NTA enables you to change the filter criteria for destination reports. You can change the default settings
for the destination host or time range to customize the charts and lists displayed on the Destination tab.
1. In the query criteria area in the upper right corner of the destination report, click the query criteria
icon
. On the list that appears, select Last 1 hour, Last 3 hours, Last 12 hours, Last 24 hours,
Last 7 days, Last 30 days, Last 3 months, or Custom. Click the Query icon in the query criteria
area to set the time range for the destination report.
2. To customize the time range for the destination report, select Custom from the list that appears in
the query criteria area, or click the Advanced icon
to the right of the query criteria field to
expand the query criteria setting area.
3. Enter or select one or more of the following query criteria:
• Destination Host—Enter the IP address or address range in the Destination Host field. To enter
the IP address for a single host, enter the IP address using dotted decimal notation.
An example of a valid IP address entry:
10.153.89.10
An example of a valid network/subnet mask in dotted decimal notation: