Topn traffic report for destination host, Topn traffic list for destination host – H3C Technologies H3C Intelligent Management Center User Manual
Page 161
151
2.
To customize the time range for the source report, select Custom from the list that appears in the
query criteria area, or click the Advanced icon
to the right of the query criteria field to expand
the query criteria setting area.
3.
Enter one or more of the following query criteria:
•
Destination Host—Enter the IP address or address range in the Destination Host field.
An example of a valid IP address entry is as follows:
10.153.89.10
An example of a valid network/subnet mask in dotted decimal notation is as follows:
10.153.89.0/255.255.255.0
An example of a valid network/subnet mask entry using CIDR notation is as follows:
10.153.89.0/24
An example of a valid IPv6 address entry is as follows:
a001:410:0:1::1
An example of a valid IPv6 address and subnet mask using CIDR notation is as follows:
a001:410:0:1::1/64
•
Start Time—Enter the start time of the time range, in the format of YYYY-MM-DD hh:mm. Or,
click the Calendar icon
to the right of the input box to manually specify a start time.
•
End Time—Enter the end time of the time range, in the format of YYYY-MM-DD hh:mm. Or,
click the Calendar icon
to the right of the input box to manually specify an end time.
4.
Click OK.
The page displays the results of your query.
TopN traffic report for destination host
The TopN Traffic Report for Destination Host pie chart displays the distribution of inbound or outbound
traffic for TopN destination hosts for all VLANs in the selected traffic analysis task for the selected time
range. Each slice of the pie chart is a link to traffic reports for the selected destination host.
Figure 82 Destination Report: TopN Traffic Report for Destination Host
TopN traffic list for destination host
The TopN Traffic List for Destination Host provides a list of the TopN destination hosts measured by
volume of inbound or outbound traffic observed on all VLAN in the selected traffic analysis task for the
selected time range. This list includes the destination IP address, total volume of traffic generated by the