H3C Technologies H3C SecBlade LB Cards - Manual (Page 98)

89
Task Command Remarks
Delete the specified file on the
FTP server permanently.
delete remotefile N/A
Set the file transfer mode to
ASCII.
ascii By default, ASCII mode is used.
Set the file transfer mode to
binary.
binary By default, ASCII mode is used.
Set the FTP operation mode to
passive.
passive By default, passive mode is used.
Display the local working
directory of the FTP client.
lcd N/A
Upload a file to the FTP server. put localfile [ remotefile ] N/A
Download a file from the FTP
server.
get remotefile [ localfile ] N/A
Switching to another user account
After you log in to the FTP server with one user account, you can switch to another user account to get a
different privilege without reestablishing the FTP connection. You must correctly enter the new username
and password. A wrong username or password can cause the FTP connection to disconnect.
To switch to another user account:
Task Command
Change the username after FTP login. user username [ password ]
Maintaining and troubleshooting the FTP connection
Task Command Remarks
Display the help information of
FTP-related commands on the FTP server. remotehelp [ protocol-command ]
N/A
Enable information display in a detailed
manner.
verbose
By default, the function is
enabled.
Enable FTP related debugging when the
device acts as the FTP client.
debugging
By default, the function is
disabled.
Terminating the FTP connection
To terminate your FTP connection, perform one of the following tasks: