H3C Technologies H3C SecBlade LB Cards - Manual (Page 34)

25
Task Command Remarks
(Optional.) Upload the security log
file to the SFTP server.
• Establish a connection to an
IPv4 SFTP server and enter
SFTP client view:
sftp server [ port-number ]
[ vpn-instance
vpn-instance-name ]
[ prefer-compress { zlib |
zlib-openssh } |
prefer-ctos-cipher { 3des |
aes128 | des } |
prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex
{ dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des |
aes128 | des } |
prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ]
*
• Establish a connection to an
IPv6 SFTP server and enter
SFTP client view:
sftp ipv6 server
[ port-number ] [ vpn-instance
vpn-instance-name ]
[ prefer-compress { zlib |
zlib-openssh } |
prefer-ctos-cipher { 3des |
aes128 | des } |
prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex
{ dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des |
aes128 | des } |
prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ]
*
• Upload a file on the client to
the remote SFTP server:
put localfile [ remotefile ]
• Download a file from a
remote SFTP server and save
it:
get remotefile [ localfile ]
Optional.
The sftp and sftp ipv6 commands
are available in user view. The other
commands are available in SFTP
client view.
For more information about these
commands, see Security Command
Reference.
For all other operations supported
by the device acting as an SFTP
client, see Security Configuration
Guide.
Enabling synchronous information output
The output of system logs interrupts ongoing configuration operations. You have to find the previously
input commands before the logs. Synchronous information output can show the previous input after log