H3C Technologies H3C SecBlade LB Cards - Manual (Page 59)

50
Table 17 Configuration items
Item Description
Time/Date Time when the log was generated.
Mode Whether the log is added or removed.
Source IP Source IP address.
Reason
Why the source IP address was added to the blacklist:
• Auto insert—The source IP address was automatically added to the blacklist by
the system.
• Manual insert—The source IP address was manually added to the blacklist
through the Web interface.
Hold Time Hold time.
Displaying user logs (flow logging)
This section describes how to view the userlog in the Web interface. For information about viewing the
userlog at the CLI, see " Displaying and maintaining user logging ."
To display user logs through the Web interface, configure outputting user logs to the information center.
Select Log Report > Report > Userlog from the navigation tree to enter the page for displaying user logs.
If you select the 1.0 option, the user logging information is displayed, as shown in Figure 21 . If you select
the 3.0 option, the user logging 3.0 information is displayed, as shown in Figure 22 .
Figure 21 User logging 1.0 log report