H3C Technologies H3C SecBlade LB Cards - Manual (Page 81)

72
Ethernet statistics group configuration example
Network requirements
Configure the RMON statistics group on LB (the RMON agent) in Figure 29 to gather cumulative traffic
statistics for GigabitEthernet 0/1.
Figure 29 Network diagram
Configuration procedure
# Configure the RMON statistics group on the RMON agent to gather statistics for GigabitEthernet 0/1.
system-view
[LB] interface gigabitethernet 0/1
[LB-GigabitEthernet0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 0/1.
display rmon statistics gigabitethernet 0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet0/1
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)
History group configuration example
Network requirements
Configure the RMON history group on LB (the RMON agent) in Figure 30 to gather periodical traffic
statistics for GigabitEthernet 0/1 every one minute.
Terminal
LB
Console Server
GE0/1
IP network