H3C Technologies H3C SecBlade LB Cards - Manual (Page 25)

16
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See
Table 2 for default channel
names.
4. Configure an output channel
for the monitor terminal.
info-center monitor channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the monitor terminal
through channel 1 (known as
monitor).
5. Configure an output rule for
the monitor terminal.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "
Default output rules of system
information ."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the timestamp format
for log, trap and debug
information is date.
7. Return to user view. quit N/A
8. Enable system information
output to the monitor terminal. terminal monitor
The default setting is disabled.
You must execute this command
before you can enable the display
of debug, log, and trap
information on the monitor
terminal.
9. Enable the display of system
information on a monitor
terminal.
• Enable the display of debug
information on a monitor
terminal:
terminal debugging
• Enable the display of log
information on a monitor
terminal:
terminal logging
• Enable the display of trap
information on a monitor
terminal:
terminal trapping
Optional.
By default, the monitor terminal
displays log and trap information,
and discards debug information.