H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 69)

60
Step Command Remarks
4. Configure the channel
through which system
information can be output to
the console.
info-center console channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (known as console).
5. Configure the output rules of
system information.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "
Default output rules of system
information ."
6. Configure the format of the
time stamp. info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
The time stamp format for log, trap
and debugging information is date
by default.
7. Return to user view. quit N/A
8. Enable system information
output to the console.
terminal monitor
Optional.
Enabled on the console and
disabled on the monitor terminal
by default.
9. Enable the display of system
information on the console.
• Enable the display of
debugging information on the
console:
terminal debugging
• Enable the display of log
information on the console:
terminal logging
• Enable the display of trap
information on the console:
terminal trapping
Optional.
By default, the console displays log
and trap information, and discards
debug information.
Outputting system information to a monitor terminal
Monitor terminals refer to terminals that log in to the device through the VTY user interface.
To output system information to the monitor terminal:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See
Table 3 for default channel
names.