H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 3)

Preface
The H3C WA series access points documentation set includes eight configuration guides, which describe
the software features for the H3C WA series access points and guide you through the software
configuration procedures. These configuration guides also provide configuration examples to help you
apply software features to different network scenarios.
The Network Management and Monitoring Configuration Guide describes how to manage the network,
view system information, use the ping and tracert commands to verify the current network connectivity,
and use the debug command to enable debugging and thus to diagnose system faults.
NOTE:
•
Support of the H3C WA series access points for features may vary by device model. For the feature
matrix, see
About the WA Series Access Points Configuration Guides.
• The interface types and output information may vary by device model.
This preface includes:
• Audience
• Conventions
• About the H3C WA series access points documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the WA series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.