H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 58)

49
Step Command Remarks
3. Enable CWMP. cwmp enable
Optional.
By default, CWMP is disabled.
Configuring ACS attributes
ACS attributes include ACS URL, username and password. When the CPE initiates a connection to the
ACS, the ACS URL, username and password are carried in the connection request. After the ACS receives
the request, if the parameter values in the request are consistent with those configured locally, the
authentication succeeds, and the connection is allowed to be established. If not, the authentication fails,
and the connection is not allowed to be established.
Configuring the ACS URL
You can assign only one ACS for a CPE and the ACS URL you configured overwrites the old one, if any.
To configure the ACS URL:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter CWMP view. cwmp N/A
3. Configure the ACS URL. cwmp acs url url
By default, no ACS URL is
configured.
Configuring the ACS username and password
To pass ACS authentication, make sure the configured username and password are the same as those
configured on the ACS.
To configure ACS username and password:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter CWMP view. cwmp N/A
3. Configure ACS username for
connection to the ACS.
cwmp acs username username
By default, no ACS username is
configured for connection to the
ACS.