H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 43)

34
Step Command Remarks
3. Configure system
information for the
SNMP agent.
snmp-agent sys-info { contact sys-contact |
location sys-location | version { { v1 | v2c |
v3 }* | all } }
By default, the contact is
Hangzhou H3C Tech. Co.,Ltd.,
the physical location is
Hangzhou, China, and the
protocol version is SNMPv3.
4. Configure the local
engine ID.
snmp-agent local-engineid engineid
Optional.
The default local engine ID is the
company ID plus the device ID.
5. Create or update a
MIB view.
snmp-agent mib-view { excluded |
included } view-name oid-tree [ mask
mask-value ]
Optional.
By default, the MIB view
ViewDefault is predefined and
its OID is 1.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB subtree masks
multiple times, the last
configuration takes effect.
Except for the four subtrees in
the default MIB view, you can
create up to 16 unique MIB view
records.
6. Configure SNMP NMS
access right.
• Method 1: Create an SNMP community:
snmp-agent community { read | write }
community-name [ acl acl-number |
mib-view view-name ]*
• Method 2: Create an SNMP group, and
add a user to the SNMP group:
a. snmp-agent group { v1 | v2c }
group-name [ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number ]
b. snmp-agent usm-user { v1 | v2c }
user-name group-name [ acl
acl-number ]
Use either method.
The username configured by
using method 2 is equivalent to
the community name configured
by using method 1, and it must
be the same as the community
name configured on the NMS.
7. Configure the
maximum size (in
bytes) of SNMP
packets for the SNMP
agent.
snmp-agent packet max-size byte-count
Optional.
By default, the SNMP agent can
receive and send SNMP packets
up to 1500 bytes.
Configuring SNMP logging
IMPORTANT:
Disable SNMP logging in normal cases to prevent a large amount of SNMP logs from decreasing device
performance.