beautypg.com

Configuration procedure, N in, Figure 20 – H3C Technologies H3C S6300 Series Switches User Manual

Page 82

background image

72

Figure 20 Network diagram

Configuration procedure

# Create basic ACL 2000, and configure a rule to match packets with source IP address 2.1.1.1.

system-view

[DeviceA] acl number 2000

[DeviceA-acl-basic-2000] rule permit source 2.1.1.1 0

[DeviceA-acl-basic-2000] quit

# Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2.

[DeviceA] acl number 2001

[DeviceA-acl-basic-2001] rule permit source 2.1.1.2 0

[DeviceA-acl-basic-2001] quit

# Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier_1

[DeviceA-classifier-classifier_1] if-match acl 2000

[DeviceA-classifier-classifier_1] quit

# Create a traffic class named classifier_2, and use ACL 2001 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier_2

[DeviceA-classifier-classifier_2] if-match acl 2001

[DeviceA-classifier-classifier_2] quit

# Create a traffic behavior named behavior_1, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/2.

[DeviceA] traffic behavior behavior_1

[DeviceA-behavior-behavior_1] redirect interface ten-gigabitethernet 1/0/2

[DeviceA-behavior-behavior_1] quit

# Create a traffic behavior named behavior_2, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/3.

[DeviceA] traffic behavior behavior_2

[DeviceA-behavior-behavior_2] redirect interface ten-gigabitethernet 1/0/3

[DeviceA-behavior-behavior_2] quit

# Create a QoS policy named policy, associate traffic class classifier_1 with traffic behavior behavior_1,
and associate traffic class classifier_2 with traffic behavior behavior_2 in the QoS policy.

[DeviceA] qos policy policy

[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1

[DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2

[DeviceA-qospolicy-policy] quit

# Apply the QoS policy named policy to the incoming traffic of Ten-GigabitEthernet 1/0/1.