beautypg.com

Configuration procedures – H3C Technologies H3C S6300 Series Switches User Manual

Page 49

background image

39

Figure 11 Network diagram

Configuration procedures

1.

Configure Device A:
# Configure ACL 2001 and ACL 2002 to match traffic from Server and Host A, respectively.

system-view

[DeviceA] acl number 2001

[DeviceA-acl-basic-2001] rule permit source 1.1.1.1 0

[DeviceA-acl-basic-2001] quit

[DeviceA] acl number 2002

[DeviceA-acl-basic-2002] rule permit source 1.1.1.2 0

[DeviceA-acl-basic-2002] quit

# Create a class named server and use ACL 2001 as the match criterion. Create a class named
host and use ACL 2002 as the match criterion.

[DeviceA] traffic classifier server

[DeviceA-classifier-server] if-match acl 2001

[DeviceA-classifier-server] quit

[DeviceA] traffic classifier host

[DeviceA-classifier-host] if-match acl 2002

[DeviceA-classifier-host] quit

# Create a behavior named server and configure the CAR action for the behavior as follows: Set
the CIR to 102400 kbps, and mark the excess packets (red packets) with DSCP value 0 and

transmit them.

[DeviceA] traffic behavior server

[DeviceA-behavior-server] car cir 102400 red remark-dscp-pass 0

[DeviceA-behavior-server] quit

# Create a behavior named host and configure the CAR action for the behavior as follows: Set the
CIR to 25600 kbps.

[DeviceA] traffic behavior host

[DeviceA-behavior-host] car cir 25600

[DeviceA-behavior-host] quit

# Create a QoS policy named car and associate class server with behavior server and class host

with behavior host.

[DeviceA] qos policy car

[DeviceA-qospolicy-car] classifier server behavior server

[DeviceA-qospolicy-car] classifier host behavior host

Internet

1.1.1.1/8

1.1.1.2/8

XGE1/0/3

XGE1/0/1

XGE1/0/2

XGE1/0/2

XGE1/0/1

Host A

Device A

Device B

Server

Ethernet

Host B