beautypg.com

Configuring traffic redirecting, Configuration procedure – H3C Technologies H3C S6300 Series Switches User Manual

Page 80

background image

70

Configuring traffic redirecting

Traffic redirecting is the action of redirecting the packets matching the specific match criteria to a certain

location for processing.
The following redirect actions are supported:

Redirecting traffic to the CPU—Redirects packets that require processing by the CPU to the CPU.

Redirecting traffic to an interface—Redirects packets that require processing by an interface to the
interface. This action applies to only Layer 2 packets, and the target interface must be a Layer 2
interface.

Configuration procedure

To configure traffic redirecting:

Step Command

Remarks

1.

Enter system view.

system-view N/A

2.

Create a traffic class and
enter traffic class view.

traffic classifier classifier-name [ operator { and
| or } ]

By default, no traffic class
exists.

3.

Configure match criteria.

if-match match-criteria

By default, no match
criterion is configured for

a traffic class.
For more information
about the match criteria,

see the if-match

command in ACL and
QoS Command

Reference.

4.

Return to system view.

quit

N/A

5.

Create a traffic behavior

and enter traffic behavior
view.

traffic behavior behavior-name

By default, no traffic
behavior exists.

6.

Configure a traffic

redirecting action.

redirect { cpu | interface interface-type
interface-number
}

By default, no traffic
redirecting action is

configured for a traffic

behavior.
The actions of redirecting

traffic to the CPU and
redirecting traffic to an

interface are mutually

exclusive with each other
in the same traffic

behavior. The last

redirecting action
configured takes effect.

7.

Return to system view.

quit

N/A