H3C Technologies H3C S6300 Series Switches - Manual (Page 56)

46
Configuration approaches and task list
To achieve congestion management, perform the following tasks:
Tasks at a glance Remarks
(Required.) Configuring congestion management
• Configuring SP queuing
• Configuring WRR queuing
• Configuring WFQ queuing
• Configuring SP+WRR queuing
• Configuring SP+WFQ queuing
Perform one of the tasks.
(Optional.) Setting the queue aging time N/A
Configuring congestion management
Configuring SP queuing
Configuration procedure
To configure SP queuing:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter Ethernet interface
view. interface interface-type
interface-number
N/A
3. Configure SP queuing. qos sp
The default queuing algorithm on an
interface is WRR queuing.
Configuration example
Configure Ten-GigabitEthernet 1/0/1 to use SP queuing:
# Enter system view
system-view
# Configure Ten-GigabitEthernet 1/0/1 to use SP queuing.
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos sp
Configuring WRR queuing
Configuration procedure
To configure WRR queuing: