H3C Technologies H3C S6300 Series Switches User Manual

Page 73

[Device] traffic classifier classifier_dbserver

[Device-classifier-classifier_dbserver] if-match acl 3000

[Device-classifier-classifier_dbserver] quit

# Create a traffic class named classifier_mserver, and use ACL 3001 as the match criterion in the traffic
class.

[Device] traffic classifier classifier_mserver

[Device-classifier-classifier_mserver] if-match acl 3001

[Device-classifier-classifier_mserver] quit

# Create a traffic class named classifier_fserver, and use ACL 3002 as the match criterion in the traffic
class.

[Device] traffic classifier classifier_fserver

[Device-classifier-classifier_fserver] if-match acl 3002

[Device-classifier-classifier_fserver] quit

# Create a traffic behavior named behavior_dbserver, and configure the action of setting the local
precedence value to 4.

[Device] traffic behavior behavior_dbserver

[Device-behavior-behavior_dbserver] remark local-precedence 4

[Device-behavior-behavior_dbserver] quit

# Create a traffic behavior named behavior_mserver, and configure the action of setting the local
precedence value to 3.

[Device] traffic behavior behavior_mserver

[Device-behavior-behavior_mserver] remark local-precedence 3

[Device-behavior-behavior_mserver] quit

# Create a traffic behavior named behavior_fserver, and configure the action of setting the local
precedence value to 2.

[Device] traffic behavior behavior_fserver

[Device-behavior-behavior_fserver] remark local-precedence 2

[Device-behavior-behavior_fserver] quit

# Create a QoS policy named policy_server, and associate traffic classes with traffic behaviors in the

QoS policy.

[Device] qos policy policy_server

[Device-qospolicy-policy_server] classifier classifier_dbserver behavior

behavior_dbserver

[Device-qospolicy-policy_server] classifier classifier_mserver behavior

behavior_mserver

[Device-qospolicy-policy_server] classifier classifier_fserver behavior

behavior_fserver

[Device-qospolicy-policy_server] quit

# Apply the QoS policy named policy_server to the incoming traffic of Ten-GigabitEthernet 1/0/1.

[Device] interface Ten-GigabitEthernet 1/0/1

[Device-Ten-GigabitEthernet1/0/1] qos apply policy policy_server inbound

[Device-Ten-GigabitEthernet1/0/1] quit

This manual is related to the following products: