Eneo iNEX Client - Manual (Page 33)

User’s Manual
28
The list of cameras registered on the current
recording service is displayed. Clicking
the Add button at the bottom allows you to
register additional cameras on the current
recording service.
NOTES:

The number of devices that can be
recorded in a recording server differs
depending on the type and number of
the WIBU-Keys connected to the
administration server.
 If you remove a device for which some
recording has been done and register
the device again, the iNEX system
considers the device as a new device.
In this case, you can search or play back
video recorded before the device was
removed as follows: go to the Play panel
→ click the (Additional Menu) button
→ select Removed Devices.
 Recording is not supported for DVRs.
2. Select the Storage Setup tab and click the Add button at the bottom.
3. Select a hard disk drive from the list and click the Add button at the bottom. Allocate storage when the
Add Storage window appears.