Eneo iNEX Client User Manual
Page 16

iNEX Standard
11
6. Designate the folder path to install the service. Clicking the
Disk Cost… button shows the available and required disk
space for each hard disk drive for the installation. Then click
Next.
7. Enter the IP address and port number of the administration
server and click Next. You can change the settings in the
Service Manager program after completing installation.
When the installation is complete, the installed service is
connected to the administration service via the network if
the services are operating.
8. When the following screens appear, click Next.
NOTE:
The following screen appears when using Microsoft
®
Windows
®
Vista or later operating systems. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub)
box. If you do not check the box, the iNEX
program cannot auto-scan devices using ONVIF
TM
Conformance
protocol when scanning devices for device registration.