Eneo iNEX Client - Manual (Page 24)

iNEX Standard
19
Chapter 3 — Getting Started
The iNEX software consists of Service Manager, Setup and Client programs, and services should be running
on the iNEX servers for the iNEX program to operate. Refer to Chapter 4 — System Overview (p. 31)
for details about Service Manager, Setup and Client programs.
NOTE: In this manual, the “server or server system” refers to a PC on which a iNEX service is running, the
“client system” refers to a PC on which the Client program is running and the “network video device” refers
to a network video transmitter or network camera.
3.1 Running Services
NOTE: A “service” in the iNEX program is a process that runs in the background and performs a specified
operation.
When the services are installed, the services run automatically. You can also
start or stop running the services manually. Go to the Start Menu → Click iNEX
→ Run the Service Manager program.
Administration Server Recording / Streaming / Video Analytics Server
Check the status of services. If any of the services are not listed as Working under Status, start the services
manually. Refer to 4.1 Service Manager (p. 31) for details about the Service Manager program.
3.2 Log In
You are required to log in to the administration service as follows when running the Setup and Client
programs.
Go to the Start Menu → Click iNEX → Run the iNEX Setup or iNEX Client program and enter login
information.