Eneo iNEX Client - Manual (Page 139)

User’s Manual
134
− Select PTZ Camera: Select cameras to
move. This is supported for PTZ cameras
only.
− Selected PTZ Camera: Displays the
selected cameras and allows you to select a
Preset position for the camera to move. Refer
to 5.3 Controlling Cameras, PTZ Control,
PTZ Preset Control (p. 62) about setting
up Preset positions.
 Alarm Out: Select to activate alarm out when an event is detected based on the event condition setting
(supported only for devices which use the iNEX protocol).
− Duration: Enter the duration for the alarm out to
last.
− Select Alarm Out Devices: Select alarm out
devices to activate.
4. Select the users to be notified the events after double clicking the Target schedule window.
Managing Schedule
Adding a New Schedule
 Adding a new schedule with a different time range: Clicking the button in the upper left corner
of the Time Coverage schedule window allows you to add a new schedule with a different time coverage.