Eneo iNEX Client - Manual (Page 134)

iNEX Standard
129
Chapter 16 — Event Management
You can manage event detection notification to the Client system based on a preset event management
schedule and monitor or play back the event-detected video on the Client system. Event related functions
may not be supported depending on the protocol that the device uses (supported for the iNEX protocol
and some versions of the Axis protocol).
16.1 Setting up Event Management Schedule
First, check the following and run the Setup program.
 Services should be running on the system. Refer to 3.1 Running Services (p. 19) for details.
 Devices should be added to a device group. Refer to Chapter 13 — Device Management (p. 107)
for details.
Go to the Start Menu → Click iNEX → Run the iNEX Setup program → Select the Event Management
menu, and set up the event management schedule following the procedures below.
Click the Schedule Setup button at the bottom. The Schedule Setup window appears, and schedule
windows are displayed with the current settings for each Preset.