Eneo iNEX Client - Manual (Page 12)

iNEX Standard
7
4. When the following screen appears, select Install and click
Next.
5. Select Administration Service and Monitoring Service,
and click Next. If the administration service and monitoring
service are installed on separate PCs, select the service to
install and click Next.
6. Designate the folder path to install the services. Clicking the
Disk Cost… button shows the available and required disk
space for each hard disk drive for the installation. Then click
Next.
7. If you use the update service, it is required to enter the IP
address and port number of the update server when installing
the administration service. You can change the settings in
the Service Manager program after completing installation.
Refer to 2.3 Automatic Upgrade, Update Service Setup
(p.14) for details.