Amer Networks SS3GR24i - Manual (Page 83)

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
LACP Active – The port automatically
sends LACP protocol packets.
LACP Passive – The port does not
automatically send LACP protocol
packets, and responds only if it
receives LACP protocol packets from
the opposite device.
Manual – static link aggregation
Group Member The Master port of link aggregation
group.
Unit Allows the selection of a particular
switch in a switch stack, if you have
the optional stacking module installed
and have properly interconnected the
switches in the switch stack.
Port Member Allows the specification of the ports
that will make up the link aggregation
group.
Click Apply to save the changes after setting the configuration
options. The Group Settings will be displayed in the list at the
bottom of the page.
Port Priority
Port Priority configuration is configured so that if a link goes down,
LACP port priority is used to select a backup link. This is
configured from the Port Priority Page located in the Port Security
Subfolder.
77