Amer Networks SS3GR24i - Manual (Page 74)

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
Parameter Description
Interval < 2 Seconds > The interval (in seconds) that the table
is updated. The default is 2 seconds .
Total RX Bytes Displays the number of bytes (octets)
received by the switch in total number
(Total), and rate (Total/sec).
Total RX Pkts The number of packets (or frames)
transmitted or received, per second, by
the switch.
Broadcast RX Displays the number of broadcast
packets received by the switch in total
number (Frame Counts) and the rate
(Frames/sec).
Multicast RX Displays the number of multicast
packets received by the switch in total
number (Frame Counts) and the rate
(Frames/sec).
CRC/Align Errors Counts otherwise valid packets that
did not end on a byte (octet) boundary
Undersize Pkts The total number of frames received
that were less than 64 octets long
(excluding framing bits, but including
FCS octets) and were otherwise well
formed.
Oversize Pkts The total number of frames received
that were longer than 1518 octets
(excluding framing bits, but including
FCS octets) and were otherwise well
formed.
68