Amer Networks SS3GR24i - Manual (Page 76)

SS3GR24i/SS3GR48i Layer3 Stackable Gigabit Switch User’s Guide
framing bits but including FCS octets).
1024-1518 Pkts The total number of packets (including
bad packets) received that were 1024-
1518 octets in length (excluding
framing bits but including FCS octets).
Port Mirroring
To configure a port for port mirroring, click the Ports Folder, and
then the Basic Port Configuration Subfolder and finally the Port
Mirroring Page.
Figure 6-19. Port Mirroring Page
To configure for Port Monitoring follow these steps:
1. Select the Monitoring Port from the first drop down box, ex. 2/1
is switch number 2 (in a stack), port number 1. The Monitoring
Port receives the copies from the Monitored Port for analysis
2. Select the Monitored Port from the second drop down box, ex.
2/2 is switch number 2 (in a stack), port number 2. The
Monitored Port is the source port where information is
duplicated and sent to the Monitoring port for analysis.
70