Amer Networks SS3GR24i - Manual (Page 14)

SS3GR24i/SS3GR48i Layer 3 Stackable Gigabit Switch User’s Guide
After the switch is powered on, the LED indicators should respond
as follows:
• All LED indicators will momentarily blink. This blinking of
the LED indicators represents a reset of the system.
• The power LED indicator is always on after the power is
turned on.
• The console LED indicator will blink while the Switch loads
onboard software and performs a self-test
Power Failure
As a precaution in the event of a power failure, unplug the switch.
When power is resumed, plug the switch back in.
8