AEC Colortronic MS Series Screenless Granulator - Manual (Page 31)

Chapter 7 Maintenance and check
- 26 -
[WO-3531;ET 26]
3. Every six months maintenance and check
Inspection items Contents of work
Bolts and nuts of each part Check if there is any looseness of bolts and nuts.
Fasten them, if necessary.
4. Exchange of grease
Inspection items Contents of work
Bearing The oilless type is used. Therefore the exchange is not necessary for about
30.000 hours operation.
Geared motor
(Hypoid motor)
It is not necessary to exchange or add the grease. However, for more long life it
is recommended to exchange after 20.000 hours operation.
［ Recommended grease］
◇ Nihon Grease K.K.: Nigutait LYS NO.000
◇ Showa Shell K.K. : Albania EP grease R000
◇ Nihon Sekiyu K.K.: Buyknock Universal 000
※ Face mount type Hollow shaft type
Motor output 0.75kW 1.5kW 2.2kW
Reduction ratio 1/60～1/200 1/40～1/80 1/60～1/80
Volume of grease 1.15kg 1.05kg 2.5kg