AEC Colortronic MS Series Screenless Granulator - Manual (Page 30)

Chapter 7 Maintenance and check
- 25 -
[WO-3531;ET 25]
2. Every three months maintenance and check
Do the function check of each safety limit switch.
If, when the function doesn't operate normally, stop the operation, and
contact to the nearest our service division. (refer to the back cover)
DANGER
When the safety limit switch operates under the trouble condition,
because they become the cause of trouble and accident, never do it.
Inspection items Contents of work
Feed hopper and limit switch
×
2 for closing confirmation of
cutting chamber
The switch of control box is changed to "OPERATION position"
("1"indicated) side under the condition that feed hopper is opened, and
confirms that the gaunulator doesn't start.
※
When the granulator starts, the limit switch is a trouble, at once, do the
repair or exchange.
DANGER
Don't insert a hand and fingers to the inside of granulator.
A hand and a finger are likely to be amputated by the sharp rotation
cutter.