AEC Colortronic MS Series Screenless Granulator - Manual (Page 25)

Chapter 5 Preparations for operation
- 20 -
[WO-3531;ET 20]
2. Confirmation of each unit condition
Confirmation unit Contents of confirmation
Feed hopper Confirm whether feed hopper is closed securely.
(Confirm the fastening condition of the feed hopper clamp)
NOTE
When feed hopper is open and when it isn't securely close.
The granulator can't start when either of two limit switch for the
closing confirmation is off.
Cutting chamber of the
granulator Confirm whether cutting chamber of the granulator is closed securely.
(Confirm the fastening condition of the cutting chamber clamp)
NOTE
When cutting chamber of the granulator is open and when it isn't
securely close.
The granulator can't start when either of two limit switch for the
closing confirmation is off.
Suction box (KKB)
or suction box (SKB)
or
receive box
Confirm whether suction box (KKB)(or suction box (SKB) or receive box)
is being installed in discharge port of granulator lower part.
NOTE
Confirm whether the hinge bolt for the fixation is fastened.