AEC Colortronic MS Series Screenless Granulator - Manual (Page 26)

Chapter 6 Operation
- 21 -
[WO-3531;ET 21]
This chapter explains about operation of equipment and stop operation
in order.
NOTE
Before operation starts, do the mentioned work of Chapter 5.
Preparations for operation.
Step Operation Contents of operation
１
Operation Turn the emergency stop push button on operation box to the
direction of arrow. Then, reset the emergency stop.
Press the operation push button on operation box.
The granulator starts at the same time when the operation
indication (Green indicated) of the operation box is turn on.
DANGER
◎ Don't insert a hand and fingers to the inside of feed
hopper and the lower part of granulator during the
operation.
A hand and a finger are likely to be amputated with the
sharp rotation cutter.
◎ Don't peep into the inside of feed hopper during the
operation.
Plastic material scatters, and has danger that is hit to the
face.
CAUTION
Insert a single runner only.
It causes a trouble when many runners are inserted.
NOTE
◎ When the cutting chamber of granulator or the feed
hopper isn't completely close. And, a equipment doesn't
start when a limit switch for the close confirmation off.
◎ When fastening of the cutting chamber clamp of
granulator or feed hopper are loose. And, the equipment
doesn't start when it is in a limit switch for the close
confirmation closing.
Then, the equipment stops as soon as possible when a
limit switch for the close confirmation off by the vibration
in the start.