AEC Colortronic MS Series Screenless Granulator - Manual (Page 28)

Chapter 7 Maintenance and check
- 23 -
[WO-3531;ET 23]
This chapter describes maintenance and check items and how to
perform it to maintain the unit in good condition per frequency.
WARNING
Performs to check with a full-time person of this unit.
1. Daily maintenance and check
Inspection items Contents of work
Check the noise (particularly metallic noise) occurring when operatong.
※
If noise is identified, stop operation immediately and find the cause of the
nise.
CAUTION
Do not operate granulator when noise is identified.
Check the abnormal vibration ocuurring when operating.
※
If abnormal vibration is identified, stop operation immediately and fine the
cause of the vibration.
CAUTION
Do not operate granulator when vibration is identified.
Check the unit body and motor have abnormal hightemperature.
※
If they get abnormally high-temperature,stop operation immediately and find
the cause of the high heat
CAUTION
Do not operate granulator when they have high heat.
Geared motor
Measure the load current value under the operation, and make sure that it is in
the rated value range.
The rated value is noted on the nameplate of the motor.
Splash prevent curtain inside
the feed hopper
Check the deterioration conditions of the splash prevent curtain.
※
Exchange the new splash prevent curtain when you injure the deterioration
condition of the curtain firmly and cruel.