Westermo TDW-33 User Manual
Page 79
6618-3202
79
Short
Form
Long Form
Description
70
+ER: NONE
The modem has connected to the line without any error correction
mode and +ER: message reporting has been enabled.
77
+ER: LAPM
The modem has connected to the line in V.42 LAPM error correction
mode and +ER: message reporting has been enabled.
78
+MRR: 31 200
The modem has connected to the line at 31 200 bit/s and carrier
reporting is enabled.
79
+MRR: 33 600
The modem has connected to the line at 33 600 bit/s and carrier
reporting is enabled.
80
+ER: ALT
Sent when modem has connected in the MNP mode of error
correction, and +ER: message has been enabled ( see S95, Wn,
and Xn ).
83
LINE IN USE
The modem attempted to go off-hook when an extension was already
occupying the line.
84
CONNECT
33 600
Connection, DTE speed 33 600 bit/s, DTE speed reporting is enabled
91
CONNECT
31 200
Connection, DTE speed 31 200 bit/s, DTE speed reporting is enabled
134
+MCR:B103
The modem has connected to the line with Bell 103 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
135
+MCR:B212
The modem has connected to the line with Bell 212 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
136
+MCR:V21
The modem has connected to the line with V21 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
137
+MCR:V22
The modem has connected to the line with V22 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
138
+MCR:V22B
The modem has connected to the line with V22B modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
139
+MCR:V23
The modem has connected to the line with V23 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
140
+MCR:V32
The modem has connected to the line with V32 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
141
+MCR:V32B
The modem has connected to the line with V32B modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
142
+MCR:V34
The modem has connected to the line with V34 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
145
+MCR:V90
The modem has connected to the line with V90 modulation and
modulation reporting is enabled ( see +MR, Wn, and Xn ).
180
CONNECT
28000
The modem has connected to the line at 28000 bit/s and DCE
reporting is enabled.