Westermo TDW-33 - Manual (Page 17)

6618-3202 17
+GCI – Country Parameters
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
This command selects the country code for modem.
Syntax:
AT+GCI =
AT+GCI = ?
AT+GCI?
Parameters:
Please refer to Country table
i.e.
A5: Selects country code for Sweden
B5: Selects country code for America
C7: Universal country code (Default)
Command example Possible responses Note
AT+GCI = OK The command is valid
and accepted
ERROR Otherwise
S register: None
Hn – Disconnect (Hang-Up)
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
This command initiates a hang-up sequence.
Syntax:
ATH
Parameters:
0: The modem will release the line if the modem currently is on-line.
1: If on-hook, the modem will go off-hook and enter command mode.
Command example Possible responses Note
ATH OK The command is valid
and accepted
ERROR Otherwise
S register: None