Westermo TDW-33 User Manual
Page 7
6618-3202
7
&Bn – DTR/TX Dial Option
Supported by:
TDW-33
TD-36
TD-36 485
TR-36
TR-36B
Description:
This command enables the modem to dial a number which is stored with AT&Z0
commands. This is performed when the DTR signal goes from inactive to active signal
level or when data is received on the DTE TX line (in command mode).
After enabling the Hotcall functionality the modem must be restarted for the function to
take affect. Disable the TX Hotcall function by sending an escape sequence ’+++’ to enter
command mode and then set the &Bn command. See also AT&D and AT&K
Syntax:
&B
Parameters:
0: Disable DTR/TX Hotcall ( Default )
1:
Enable DTR Hotcall
2:
Enable TX Hotcall (buffered data)
Command example
Possible responses
Note
AT&B
The command is valid
and accepted
ERROR
Otherwise
S register: S210 bit 5 and 6
Cn – Carrier control
Supported by:
TDW-33
TD-36
TD-36 485
TR-36
TR-36B
Description:
This command is included for compatibility only, and has no effect other than returning
a result code.
Syntax:
ATC
Parameters:
Command example
Possible responses
Note
ATC
OK
The command is valid and
accepted
ERROR
Otherwise
S register: None