Westermo TDW-33 - Manual (Page 68)

6618-3202 68
Register Function Range Units Saved Default Note
S36 LAPM Failure
Control
– – * 7 Definition: S36
Bits 0–2 indicates what
should happen upon a
LAPM failure. These fallback
options are initiated imme-
diately upon connection if
S48 = 128.0.
Bits 0–2
0 = Modem disconnects.
1 = Modems Stays on-line
and a direct mode connec-
tion will be established.
2 = Reserved.
3 = Modem stays on-line
and Normal Mode connec-
tion will be established.
4 = An MNP connection is
attempted and if it fails, the
modem disconnects.
5 = An MNP connection is
attempted and if it fails, a
direct mode connection is
established.
6 = Reserved.
7 = An MNP connection
is attempted and if it fails,
normal mode connection
is established.
Bits 3–7 Reserved.
S38 Delay Before
Hang-Up – * 20 Definition: S38
Specifies the delay between
the modem receives the
H command (hang-up) to
disconnect and the discon-
nect action. Applicable to
error-correction connection
only. Used to ensure that
the modem buffer is sent
before the the modem dis-
connects.
For S38 values 0–254 the
modem waits this time until
all data is sent from buffer
before disconnecting.
S38 = 255 the modem does
not time out.