Westermo TDW-33 - Manual (Page 45)

6618-3202 45
*WIE – Ignore Errors
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description
With this command all error responses can be disabled and commands is giving an OK
response, format according to ATV setting. The intention with this command is to enable
use of application which has been written for other types of modems and has been using
undocumented / bugs in command interpretation in the replaced modem.
Syntax:
AT*WIE=
AT*WIE=?
AT*WIE?
Parameters:
0: Report Errors. (Default).
1: Disable Error reporting.
Command example Possible responses Note
AT*WIE= OK The command is valid
and accepted
ERROR Otherwise (depends on
setting of command)