Westermo TDW-33 - Manual (Page 15)

6618-3202 15
+FCLASS – Select Active Service Class
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
This command selects the active service class
Syntax
+FCLASS=
+FCLASS?
+FCLASS=?
Parameters
0: Select Data Mode (Default.)
1: Select Facsimile Class 1
8: Select Voice Mode
Command example Possible responses Note
AT+FCLASS OK The command is valid
and accepted
ERROR Otherwise
S register: None
&Gn – Select Guard Tone
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description:
The modem Generates the guard tone selected by this command according to the
parameter supplied (DPSK modulation modes only).
Syntax:
&G
Parameters:
0: Disables Guard Tone (Default)
1: Disables Guard Tone
2: Selects 1800 Hz Guard Tone.
Command example Possible responses Note
AT&G OK The command is valid
and accepted
ERROR Otherwise
S register: The value is written to S23 bits 6 and 7.