Westermo TDW-33 - Manual (Page 56)

6618-3202 56
*WIOT – General I/O test
Supported by: TD-36 485 TR-36B
Description
This command executes the specified entry as if it was trigged by the normal trigger
condition.
Syntax:
AT*WIOT=[,]
AT*WIOT=?
Parameters:
I/O entry indes number (0-10) 1-10 selects the entry at the corresponding index in the
table. Selecting entry num=0 selects the local output, the state of the output is selected
with parameter IO_state.
[,]
The state to set the local output (0 or 1) when entry_num is set to 0.
Command example Possible responses Note
AT*WIOT=2 OK Trigger and execute entry
2 in the table
AT*WIOT=? *WIOT: (0-10)[,(0-1)]OK List command parameters
Error otherwise
S register: None