Westermo TDW-33 - Manual (Page 32)

6618-3202 32
\Vn – Single Line Connect Message
Supported by: TDW-33 TD-36 TD-36 485 TR-36 TR-36B
Description
This command enables or disables the single line connect message.
This command override the ATWn command.
See also ATWn
Syntax:
AT\V
Parameters:
0: Connect messages are controlled by the settings X, Y, and S95. (Default)
1: Connect messages are displayed in the single line format described below subject
to the command settings V (verbose) and Q (Quiet). In a non-verbose mode (V0),
single line connect messages are disabled and a single numeric result code is
generated for CONNECT DTE . The single line connect message format is:
Command example Possible responses Note
AT\V0 OK
AT\V1 OK
S register: None