Westermo TDW-33 - Manual (Page 73)

6618-3202 73
Register Function Range Units Saved Default Note
S210 General func-
tion bitmap 0-255 - * 5 Bit 0: Break control
0 = Inactive, 1 = Active
Bit 1: Protocol
0 = Inactive, 1 = Active
Bit 2: Remote config
0 = Inactive, 1 = Active
Bit 3: Ignore error
0 = Inactive, 1 = Active
Bit 4: DTR hot-call
0 = Inactive, 1 = Active
Bit 5: TX hot-call
0 = Inactive, 1 = Active
Bit 6: TX hot-call buffers: 0
= Send buffer data,
1 = Empty buffer
Bit 7: Remote upgrade:
0 = Inactive,
1 = Active
S211 On-hook
timer delay 0-255 ms * 0 0 = No delay
S212 Off-hook
timer delay 0-255 ms * 0 0 = No delay
S213 DCE data
out timer
delay 0-255 ms * 0 0 = No delay
S214 General
function
bitmap - - - 6 Bit 0: No Line speed limit
(DTEvsLINE): 0 = Inactive,
1 = Active (Default = 0)
Bit 1: V.23 HDX PSTN inac-
tivity timer: 0 = Inactive,
1 = Active (Default = 1)
Bit 2: V.23 HDX/FDX no
disconnect on DCD drop:
0 = Inactive, 1 = Active
(Default = 1)
Bit 3: V.23 HDX activity
timer: 0 = Inactive,
1 = Active (Default = 0)
Bit 4: V.23 HDX activ-
ity timer no recovery: 0 =
Inactive, 1 = Active
(Default = 0)
Bit 5: Reserved
Bit 6: Reserved
Bit 7: Reserved